<?xml version="1.0" encoding="UTF-8"?><rss version="2.0">
<channel>
<description>ContentBox RSS Feed</description>
<link>https://pi.bradwood.com/</link>
<title>Blog RSS Feed by ContentBox</title>
<copyright>Ortus Solutions, Corp (www.ortussolutions.com)</copyright>
<docs>http://www.rssboard.org/rss-specification</docs>
<generator>ColdBox Feed Generator - 2.1</generator>
<lastBuildDate>Tue, 07 Apr 2026 21:55:12 GMT</lastBuildDate>
<pubDate>Tue, 07 Apr 2026 21:55:12 GMT</pubDate>
<item>
<title>Neo, the (LED) Matrix Has You</title>
<description>In mylast post, I completed the "hello world" of digital electronics-- making a single LED blink. Today we'll be turning it up a notch and controlling 64 separate LEDs. Ok, there ARE 64 LEDs, but the Pi's GPIO doesn't actually have enough output pins to control that many pins individually. What's a hardware hacker to do?? 
</description>
<link>https://pi.bradwood.com/blog/neo-the-led-matrix-has-you</link>
<pubDate>Sat, 18 Apr 2015 05:08:00 GMT</pubDate>
<author>brad@bradwood.com (Wood Brad)</author>
<category>ColdFusion</category>
<category> CommandBox</category>
<category> GPIO</category>
<category> Raspberry Pi</category>
<guid isPermaLink="false">https://pi.bradwood.com/blog/neo-the-led-matrix-has-you</guid>
</item>
<item>
<title>Programming the Raspberry Pi's  GPIO With CFML</title>
<description>

I know I promised to blog some more about how I set this blog up, but I've been too excited to to get playing with the GPIO (General Purpose Output)pinson my Pi. The input/output pins are what make the Pi really similar to my Arduino. They're the glue that allow hardware and software to really meet. Except on my Arduino, I must use C that's compiled to machine code and loaded onto a basic microcontroller. My Pi runs an actual operating system, so I can use whatever high-level language I fancy and bring whatever syntax and productivity I want along for the ride.
</description>
<link>https://pi.bradwood.com/blog/programming-the-raspberry-pis-gpio-with-cfml</link>
<pubDate>Sun, 12 Apr 2015 18:56:00 GMT</pubDate>
<author>brad@bradwood.com (Wood Brad)</author>
<category>ColdFusion</category>
<category> CommandBox</category>
<category> GPIO</category>
<category> Raspberry Pi</category>
<guid isPermaLink="false">https://pi.bradwood.com/blog/programming-the-raspberry-pis-gpio-with-cfml</guid>
</item>
</channel>
</rss>

					
					

					
					
		
		
	
				

			
			

			
			

			
			
		
		
	

			
			
				
			

			
			
		

		
		

		
		
	
